Plasma Airflow Switches

  • Model  100 AFS-MF
  • Model ASF-MF-JB

Ionization units should be powered when there is air flow in the system. The Plasma Air Model AFS-MF provides a convenient method for powering Series 100 and 200 Ionization Units. The AFS-MF is equipped with a pressure switch which closes at 0.05 inch WG. The unit can be used on either positive or negative pressure ducts.

The AFS MF can be installed in metal duct utilizing the factory supplied gaskets and pre-drilled flange. The unit is shipped complete with an electrical “jumper cord” and (4) 4 mm mounting screws to mount the ionization unit to the AFS-MF frame. The frame is mounted to the duct with sheet metal screws.

Ionization units should be powered when there is air flow in the system. The Plasma Air Model AFS-MF-JB provides a convenient method for powering Series 100 and 200 Ionization Units. The AFS-MF-JB is equipped with a pressure switch which closes at 0.05 inch WG. The unit can be used on either positive or negative pressure ducts. The AFSMF-JB can be installed in metal duct utilizing the factory supplied gaskets and pre-drilled flange. The unit is shipped complete with an electrical “jumper cord” and 4 mm mounting screws to mount the ionization unit to the AFS-MF-JB frame. The frame is mounted to the duct with sheet metal screws.

PURE Plasma Airflow Switches

Model 100 AFS-MF

Plasma Airflow Switches ASF MF JB

Model AFS-MF-JB

PlasmaPURE Autoclean 15002021-07-01T10:07:21+00:00
PlasmaPURE AutoClean 1500
PlasmaPURE Air 6022021-06-30T08:09:31+00:00
Plasma PURE Air 602
Plasma Air 6002021-05-13T01:33:36+00:00
Plasma Air 6602021-05-13T01:34:21+00:00
Plasma Air 70002021-05-13T01:35:02+00:00
Plasma BAR2021-05-13T01:38:17+00:00
Plasma Air Bar-X2021-05-13T01:39:01+00:00
Plasma BAR CP2021-05-13T01:50:02+00:00
In Duct Ion Sensor2021-05-13T01:48:23+00:00
Air Ion Counter2021-05-13T02:53:31+00:00