Plasma Air 50

  • Airflow Capacity up to 10,000 CFM
  • Five position ion level control knob
  • Remote monitoring

The 50 series ion generators are 5 tube industrial quality units intended for installation in air handling units or in duct systems for commercial and industrial facilities. The number of units and the size of the ionization tubes are dependent upon the airflow in the system and the severity of the pollution problem.

PURE Plasma Air 50

The Plasma Air 50 Series Models 51E / 52E can be installed in ductwork utilizing the pre-drilled mounting flange and factory applied gasket. The installer makes a duct cut out and secures the unit to the duct with self-tapping sheet metal screws. The unit can also be installed inside an HVAC unit utilizing a contractor supplied mounting bracket. Power to the inlet should be interlocked with system fan operation. The power input fitting provides easy disconnection of the power supply for servicing the unit. A five position ion level control knob varies the ion output between 50% and 100%. A low voltage dry contact is provided for remote monitoring of unit operation.

• Remote Monitoring Cable
• Pressure Differential Switch (AFS) for interlocking with fan operation